You are a champion in the kitchen and rely on the refrigerator to keep your food cool and tasty. Although it might be disconcerting to discover that your refrigerator is not chilling adequately, this does not always indicate that it has to be replaced. We’ll go through some of the likely causes of your refrigerator’s lack of cooling in the section below, along with some solutions.
Top 8 reasons for you fridge is not cooling.
The good news is that the reason of your refrigerator’s improper cooling is frequently a simple and quick remedy. In order of simplest to hardest to solve, the following common causes might result in your refrigerator appearing to suddenly stop cooling:
- Power source has been switched off
- Thermostat isn’t set properly
- Blocked vents
- Dirty condenser coils
- Dirty or faulty gaskets
- Not enough space clearance
- Broken or stuck condenser fan
- Faulty circuit board
We’ll cover how to address these potential reasons below if your refrigerator isn’t chilling as it should.
POWER SOURCE UNPLUGGED OR SWITCHED OFF
If your refrigerator isn’t chilling, make sure it’s still plugged in and that the switch at the breaker box that powers your kitchen appliances hasn’t been turned off. Check the power supply if you open your refrigerator and neither the light nor the refrigerator is cooling.
THERMOSTAT IS UNPROPERLY SET
For optimum functioning, your refrigerator’s temperature should be maintained between 32° and 40°F. Make sure that your thermostat is set within that range if your refrigerator stops cooling. Depending on where your refrigerator’s thermostat is located, it can be simple for little children to accidentally adjust the settings or for food items to knock against the switch.
BLOCKED VENTS
For refrigerators to cool effectively, there has to be adequate ventilation. Food items in the freezer and/or refrigerator compartments may be obstructing the vents if your refrigerator isn’t cooling. Overfilling your refrigerator with food might result in obstructions that stop the cold air from properly flowing and clog the vents. Move any objects that could be obstructing the vents and arrange your refrigerator so that sufficient ventilation is ensured. Your freezer vent could occasionally get iced over. In this situation, you ought to scrape off the ice.
UNCLEAN CONDENSER COILS
On the condenser coils of your refrigerator, dust, grime, and other debris may accumulate over time. These coils, which are often found on the rear or bottom of your refrigerator, can get clogged with dust or pet hair. Blocked coils may make the compressor work harder than is necessary and may make it more difficult for the heat from your refrigerator to be discharged. If there is a lot of pet activity in your home or the area surrounding your refrigerator is unusually oily or filthy, it is advised that you clean the coils every two to three months to help prevent this issue.
MUDDY OR DEFECTIVE GASKETS
The gaskets, a soft, flexible seal that is found on the inside of your refrigerator door, may get soiled or worn with time, making it difficult for your refrigerator to be securely sealed. The gaskets aid in maintaining cold air inside the refrigerator compartment and preventing it from evaporating. If you see chilly air leaking from your refrigerator, use a sponge and warm, soapy water to wipe the gaskets and edges of the device.
If your gaskets have been cleaned but air is still escaping and your refrigerator is still not chilling, call for service so a specialist can determine if your gaskets need to be replaced.
INSUFFICIENT SPACE CLEARANCE
Heat is emitted during the chilling process of refrigerators as the refrigerant condenses from vapor to liquid. To operate at its best, your fridge needs at least 1 inch of back clearance and 1 inch of side clearance. Check that you have the necessary clearance space for your refrigerator to operate correctly by consulting the installation instructions that came with your refrigerator. Discover the fundamentals of refrigerator organization and the ideal setup for a side-by-side refrigerator.
STUCK OR BROKEN CONDENSER FAN
Most refrigerators include at least one fan, which is typically mounted on the back of the device. This fan helps avoid compressor overheating by keeping the condenser coils cold. If your fan suddenly stops functioning, you might wish to get it repaired by a professional.
DEFECTIVE CIRCUT BOARD
The circuit board serves as the refrigerator’s “brains,” managing everything from temperature control to powering certain components. If your fridge isn’t cooling correctly even after you’ve eliminated other potential issues and tried troubleshooting, you could have a bad circuit board. The best course of action may be to hire a professional to diagnose and fix them as replacing them might be costly.